How to reduce glass bead or steel ball materials loss of sand blasting machine
How to reduce glass bead or steel ball materials loss of sand blasting machine
The following points for glass bead or steel ball materials loss reduction in sand blasting
1. Pressure
The pressure is very important, which directly leads to the glass bead or steel ball loss of the sand blasting machine.
To make the fastest efficiency and the lowest glass bead or steel ball loss, it is necessary to know the material of the user’s products and detailed and accurate data. Only by knowing each other can you make the best results.
2. Dust collector
The blasting machine is adjusted to the optimum position before use. Clean the filter cartridge of the dust collector on time, and timely drain the waste sand inside to minimize the amount of glass bead or steel ball usage.
3. Spray gun
Before using the sand blasting machine, first check if there is any wear inside the spray gun, If there is wear on the nozzles and other places in the inspection, and timely replacement is required to indirectly avoid the waste of glass bead or steel ball
4. Sand pipe
It is necessary thing to check whether the sand pipe is straight before the sand blasting machine work. If it is curved, it will definitely waste the amount of glass beads or steel balls.
5. Separator
It is the most important part of saving glass beads or steel balls.
Before purchasing a sand blasting machine, you should tell the manufacturer exactly the type of abrasive before the process is determined so that the blasting machine manufacturers can combine your design well when designing.
The required standards are to achieve precise control. glass bead or steel ball naturally beneficially reduce the amount of use.
Brightstar Aluminum Machinery provides automatic aluminum profile shot blasting machine for our customers, total solution and turnkey project and package deal.
Contact us now for your aluminum profile shot blasting solution!
Get A No-obligation Quote