Baghouse dust collector delivery for India customer

Baghouse dust collector delivery for India customer

Baghouse dust collector delivery for India customer

India customer baghouse dust collector container loading

The baghouse dust collector container loading was done this week for our India loyal customer. 

Many thanks for our customer support and good job, Brightstar. 

As it is the end of Chinese New Year and we are rushing the delivery for our customers and our factory will be closed from 16th January 2020 for Chinese New Year holiday.

The baghouse dust collector was designed for aluminium melting workshop pollution control, which can make your production normal,  without the pollution inspection and control production stop problem. 

The emission concentration ≤30mg/Nm3;

Dust removal efficiency ≥99.5%;

Dust collecting rate ≥90%;

Fan noise ≤85dB and Ringelman emittance≤ 1 level.

The smelting furnace all adopt regenerative burner, the fuel is natural gas, and the exhaust gas generated by combustion, which mainly contains COx, NOx, H2O, Alo, dust, charcoal dust, chloride salt and a small amount of acid gas.

The furnace door of the melting furnace will be opened when charging and skimming, the flue gas is discharged from the furnace mouth, and when the furnace door is closed, the flue gas in the furnace is discharged through the exhaust fan of regenerative burner

The production process is charging- stirring – smelting – degassing – skimming – casting.

The melting time for each batch is 6-8 hours. During the whole smelting process, intermittent charging is required. The charging times are relatively frequent. During the charging process, the furnace material needs to be stirred.

During the smelting process, the furnace door needs to be opened for degassing and skimming and other workflows.

During the above operation, a large amount of smoke dust is generated, which causes serious pollution to the environment.

Therefore, it is necessary to equip the corresponding environmental protection equipment so that the exhaust fumes can meet the national emission requirements after being treated.

The design scope is air volume design, dust catching system, baghouse dust collector, air motor matching, smoke exhaust pipe system, electrical control system and so on.

The baghouse dust collector can make your melting without any stop and make your factory running always, no need to close the factory because of the pollution problem. 

Keep the green hills and clear water with our pollution control equipment. 

Contact us now for your aluminium project baghouse dust collector.