Aluminum dross machine loading for Togo customer

Aluminum dross machine loading for Togo customer

Aluminum dross machine loading for Togo customer

Dated on 7th December 2022, the container loading of aluminum dross machine was completed for Togo customer, the destination port is Lome port of Togo.

Good job, Brightstar!  Thank you very much, our loyal customer!

Aluminum dross machine equipment is mainly applied for the treatment of high-temperature aluminum dross on the furnace site.

The purpose is to recover the metal aluminum from hot aluminum dross, reduce the loss and reduce material costs, increase the profit.

The working principle of the aluminum dross machine is to increase the temperature of high-temperature aluminum dross evenly by stirring,

And to make the aluminum dross move to generate friction through stirring and moving,

Destroying the oxide film coated on the outside of the aluminum liquid, so that the aluminum liquid is collected and discharged.

The dross stirring system is the core of the whole set of equipment, which undertakes the tasks of heating up the aluminum dross and separating the aluminum from the aluminum dross.

It is mainly composed of the frame, guard plate, heatproof pot, shaft, stirrer, transmission, reducer and motor.

The frame plays a supporting role, in order to facilitate transportation and container loading, the top and bottom separate structures are adopted, and the guard plates play the role of the enclosure.

The heatproof pot is fixed on the bottom frame, and the pot is provided with a liquid aluminum discharging hole, the dross outlet and an opening and closing device for the dross outlet.

The stirring device is set on the top frame, and the stirring device is driven by the motor through the belt to the cycloid reducer.

The cycloid reducer is directly connected with the stirring reducer.

The output shaft of the stirring reducer can be lifted up and down, and the output shaft drives the stirrer rotates and stirs in the operation.

The dust collector system includes the collection hood, pipeline, fan, cyclone dust collector, water mist dust collector, baghouse dust collector,

And can be equipped with dry or wet dust removal or dry-wet mixed dust removal according to the standards of environmental protection requirements, and can meet the emission standards.

The cooling system is to cool the dross after the processing to achieve the condition of bagging to avoid burning again.

The cooling system adopts a water-cooled drum structure, and the discharge temperature is below 60°C.

The cooling system and the dross pot of the aluminum dross machine are directly connected through the launder, and the dust removal system is shared with aluminum dross machine, which can be selected by the customers according to the situation

Aluminum dross machine can be called a magic weapon for aluminum dross processing, and it is being applied by thousands of alloys factories, scrap recycling factories, secondary aluminum production factories, casting factories and extrusion factories, etc.

Little machine, big performance! Aluminum dross machine.

Contact Us Now For A Reliable No-Obligation Quote