Part seven: adverse bonding defects, extrusion defect analysis and quality control method

Part seven: adverse bonding defects, aluminum extrusion defect analysis and quality control method

Adverse bonding defects, aluminum extrusion defect analysis and quality control method

Adverse bonding defects

The phenomenon that the hollow product extruded by the porthole mold is delaminated or not fully bonded at the bonding joint is called adverse bonding defects. 

Adverse bonding defects causes

1. The extrusion coefficient is small, the extrusion temperature is low and the extrusion speed is fast;

2. Extrusion billets or tools are not clean;

3. The extrusion mold with oil;

4. The mold design is improper, the hydrostatic pressure is not enough or uneven, and the design of the porthole is unreasonable;

5. There is oil on the billets surface

Solutions for adverse bonding defects

1. Appropriately increase the extrusion coefficient, adjust extrusion temperature and extrusion speed;

2. Reasonable design and manufacture for the molds;

3. The extrusion container and the dummy block should be not oiled and kept clean;

4. Billets with a clean surface.

Brightstar Aluminum Machinery provides not only aluminum profile shape corrector, aluminum profile wrapping machine and aluminum profile polishing machine auxiliary equipment, but also wood grain effect sublimation machine, aluminum profile brushing cleaning machine and aluminum profile shot blasting machine, etc for our customers.

Turnkey project and completed solution, package deal and one-stop service. 

Contact us now for your aluminum project solution!

Get A No-obligation Quote