Big 5 group aluminum profile shape correcting machine in the workshop
Aluminum profile shape correcting machine in the workshop
When you get the problems for aluminum profile opening and closing dimensions out of tolerance, bending out of tolerance and other dimensions out of tolerance, what you can do is scrap them in the past and then make the extrusion again. It is a big waste.
Now you can use our aluminum profile shape correction machine to correct the dimensions and tolerance and straightness.
The most popular models are 3 group and 5 group aluminum profile shape correction machine.
Brightstar Aluminum Machinery offers 3 group, small 5 group with the cover and big 5 group aluminum profile shape corrector.
Working principle
According to the shaping requirements of the aluminum profile, select the proper correction nylon wheels, through the correcting roller will be drove by the chain, and adjust the working angle and pressure angle of the roller shaft, and carry out the dimensions and tolerances correction for aluminum profiles
(Note: The shape correction work need to be done before the anodizing).
The operation steps
1. Install the correction wheels. By adjusting the spacer, the upper and lower shafts correction wheels are aligned and the longitudinal direction is straight.
2.Adjust the opening distance of the upper and lower shafts, and determine the distance of the correction wheels according to the thickness of aluminum profiles.
3.Adjust the auxiliary squeezing rollers on both sides, adjust the distance and position of the stopper bar according to the width of aluminum profiles and the position of the shaping wheel, and adjust the height of the nip roller according to the height of aluminum profiles to ensure that the profile is the correct position under the correcting wheels in the feeding process.
4. Pressing test, in the power-on state, adjust the speed of the speed-regulating motor to a slower speed, and test the material. According to the features of aluminum profiles shapes, adjust the pressure angle of the upper roller shaft to meet the technical requirements.
5. Adjust the feeding according to the thickness, hardness and shaping effect of the profile
Contact us now for your aluminum extrusion dimensions out of tolerance solution!
Get A No-obligation Quote